ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free
Brand: Ramsta Model: R900 Type: SSD External Interface: M.2 Hard Drive Capacity:256GB Read Speed: 550MB/s Color: Black Buffer memory: 128MB NAND Flash Memory: SMI + MLC Sequential Read: Max. 550 MB/s Sequential Write: Max. 180 MB/s High-speed and high-performance SATA 6Gb/s SSD for most of SATA interface laptop. Maximum sequential reading and writing speed: 550MB/s, 180MB/s. Low noise and environment-friendly, much faster than traditional HDD. Compatible with Windows 10 / 7 / 8 / Vista / XP, Linux, Mac OS X.