Kingston

•SKU: KVR26S19S6/4 •EAN/UPC Code: 740617280647 •Memory Capacity: 4GB •Model/Series/Type: ValueRAM •Brand: Kingston •CASLatency: CL19 •Chip Organization: x8 •Form Factor: DDR4 •Memory Depth: 1G •Memory Voltage: 1.2v •Module Type: SODIMM •Operating Temperature: 0°C to 85°C •Pins: 260 Pin •Product Type/Family: DRAM •RAM Memory Type: Non-ECC •Rank: 1R (Single Rank) •Speed: 2666MHz (PC4-21300) •Weight: 9g

•Memory Size: 16GB •Memory Type: DDR4 •Latency: CL19 •Memory Speed: 2666MHz

•RAM-KINGSTON 8GB DDR4 PC2666MHZ SODIMM •PC Components, Memory Modules (RAM), SODIMM •(KVR26S19S8/8), 2666MHz, 8GB, DDR4, Kingston, SODIMM

CL(IDD) : Row Cycle Time (tRCmin) : 22 cyclesRefresh to Active/Refresh : 45.75ns(min.)Command Time (tRFCmin) : 350ns(min.)Row Active Time (tRASmin) : 32ns(min.)UL Rating : 94 V - 0Operating Temperature : 0C to +85CStorage Temperature : -55C to +100C

ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free

•Fast start-up, loading and file transfers •More reliable and durable than a hard drive •Multiple capacities with space for applications or a hard drive replacement •Form factor: M.2 2280 •Interface: SATA Rev. 3.0 (6Gb/s) – with backwards compatibility to SATA Rev. 2.0 (3Gb/s) •Capacities2: 480GB, •NAND: 3D •Baseline Performance: •Data Transfer (ATTO): •480GB — up to 500MB/s Read and 450MB/s Write •Power Consumption: 0.195W Idle / 0.279W Avg / 0.642W (MAX) Read / 1.535W (MAX) Write •Storage temperature: -40°C~85°C •Operating temperature: 0°C~70°C •Dimensions: 80mm x 22mm x 1.35mm •Weight: 5.5g (120GB – M.2), 6.7g (240GB – M.2), 5.5g (480GB – M.2) •Vibration operating: 2.17G Peak (7–800Hz) •Vibration non-operating: 20G Peak (10–2000Hz) •Life expectancy: 1 million hours MTBF