ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free
About this item 1TB Capacity, 7mm Thickness, Rotation Speed of 5400RPM 128MB Buffer, SATA 6.0Gb/s Interface, 2.5inch Hard Drive Works for any brand SATA Interface Laptop, Macbook, Notebook, USB Enclosure, PS3 & PS4 Game Console and etc (Bare Drive Only) Brown Box Single Pack, (No Screws, Cables or Accessories included) -Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system.
•Chassis Structure: Open style •Main Board: ATX/M-ATX/ITX •Color: White •CPU Upper Limit: 180mm •Video Card Limit: 380mm •DISK DRIVE: HDD x 1, SSD x 3 •Expansion Slots: 7 PCIE •USB Ports: 2.0 x 1 + 3.0 x 1, Mic x 1 + Audio x 1 •Material: Steel Plate 1.2mm-2.0mm / Stalinite 4mm •Size: 475(L)x232(W)x535(H)mm •Cooling Systyem: Front 12cm x 2 (Water cooling 240mm optional), Top 12cm x 2, Side 12cm x 2, Rear 12cm x 1