•MODEL NAME: RX 6700 XT MECH 2X 12G OC •GRAPHICS PROCESSING UNIT: Radeon™ RX 6700 XT •INTERFACE: PCI Express® Gen 4 •CORES: 2560 Units •CORE CLOCKS: Boost: Up to 2620 MHz / Game: Up to 2474 MHz •MEMORY SPEED: 16 Gbps •MEMORY: 12GB GDDR6 •MEMORY BUS: 192-bit •OUTPUT: DisplayPort x 3 (v1.4) / HDMI x 1 (Supports 4K@120Hz/8K@60Hz and VRR as specified in HDMI 2.1) •HDCP SUPPORT: Y •POWER CONSUMPTION: 230 W •POWER CONNECTORS: 8-pin x 2 •RECOMMENDED PSU: 650 W •CARD DIMENSION (MM): 247 x 131 x 51 mm •WEIGHT (CARD / PACKAGE): 921 g / 1393 g •DIRECTX VERSION SUPPORT: 12 API •OPENGL VERSION SUPPORT: 4.6 •MULTI-GPU TECHNOLOGY: Y •AFTERBURNER OC: Y •MAXIMUM DISPLAYS: 4 VR READY: Y DIGITAL MAXIMUM RESOLUTION: 7680 x 4320
ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18” (30.00mm) • RoHS Compliant and Halogen-Free
About this item 1TB Capacity, 7mm Thickness, Rotation Speed of 5400RPM 128MB Buffer, SATA 6.0Gb/s Interface, 2.5inch Hard Drive Works for any brand SATA Interface Laptop, Macbook, Notebook, USB Enclosure, PS3 & PS4 Game Console and etc (Bare Drive Only) Brown Box Single Pack, (No Screws, Cables or Accessories included) -Friendly Reminder- Please FORMAT HDD on system in order to be detected/shows on system.